D-Link AC750 User Manual page 55

Section 3 - Configuration
NetBIOS Scope:
This is an advanced setting and is normally left blank. This allows the configuration of a NetBIOS 'domain' name under which network
hosts operate. This setting has no effect if the 'Learn NetBIOS information from WAN' is activated.
NetBIOS Node: This field indicates how network hosts are to perform NetBIOS name registration and discovery. H-Node, this indicates a Hybrid-State
of operation. First WINS servers are tried, if any, followed by local network broadcast. This is generally the preferred mode if you
have configured WINS servers. M-Node (default), this indicates a Mixed-Mode of operation. First Broadcast operation is performed
to register hosts and discover other hosts, if broadcast operation fails, WINS servers are tried, if any. This mode favours broadcast
operation which may be preferred if WINS servers are reachable by a slow network link and the majority of network services such as
servers and printers are local to the LAN. P-Node, this indicates to use WINS servers ONLY. This setting is useful to force all NetBIOS
operation to the configured WINS servers. You must have configured at least the primary WINS server IP to point to a working WINS
server. B-Node, this indicates to use local network broadcast ONLY. This setting is useful where there are no WINS servers available,
however, it is preferred you try M-Node operation first. This setting has no effect if the 'Learn NetBIOS information from WAN' is
activated.
WINS IP
Enter your WINS Server IP address(es).
Address:
D-Link GO-RT-AC750 User Manual 51