JBL VP Series User Manual page 26

DPDA – HiQnet Networked Input Module with AES Digital Audio
and BSS Omnidrive HD Signal Processing
See Figure 1b
speaker system. Upgrading to the DPDA module provides powered loudspeaker system users with AES/
input and connectivity options.
Its onboard 100 Mb Ethernet networking switch with daisy-chain capability allows for Remote Control and
Monitoring via HiQnet System Architect™ software. Additionally, a rotary mechanical encoder switch allows
speaker arrays or groups.
internally.
In addition, Master Control Panels and Master Monitor Panels within System Architect software allow for
convenient grouping of control and monitoring functions for multiple JBL DrivePack enclosures with DPDA
input modules. This functionality provides a powerful remote control/monitoring interface that is especially
useful when working with larger multi-box line array or subwoofer systems.
The HiQnet System Architect™ software user interface provides remote access to the controls, displays and
INDICATORS
1) CROSSPATCH
If active, AES audio and HiQnet/network is
daisy-chained via Ethercon/RJ45 out connector.
2) AES LOCK
If active, indicates AES sync has been detected and
input card has locked to it.
3) FAULT
Red LED illuminates during any fault condition.
4) CLIP
Red LED indicates clipping at any point is detected.
5) SIGNAL
Green LED indicates a detected input
signal above the threshold set at –70dBu.
6) OVER TEMP
Orange LED illuminates during thermal limiting:
7) READY
Green LED illuminates when the system is ready for
operation.
8) DATA
Yellow LED indicates network activity
CONTROLS
9) ENABLE ALT PRESET
a) Press and hold for 3 seconds.
b) When LED is active, the alternate preset with 80Hz high pass has been recalled or loaded.
On subwoofers, the preset with 80Hz low pass is recalled.
26
Venue Performance Series User's Guide
Figure 1b