Lennox Hearth Products Symmetry SYM-35N Care And Operation Instructions Manual page 16

5
4
2
Align the two holes on the bottom of log (1) over
1
the two log tabs at the back of the burner
Align the slots at the bottom of logs (2) and (3)
2 over the log tabs on the left and right side of
the burner as shown.
Align holes at the bottom
of log (4) over the pins
4
on log (2).
Pin on log (4) used
with log (5) in Step 3.
Figure 13
16
SYM-45 LOG PLACEMENT
7
1
3
8
3
Step 1
Pin on log (1) used
with log (6) in Step 3.
Indentention used with
log (7) in Step 4.
Step 2
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Number
6
Catalog Number for the entire
log set: H6959
First place log (6) over the pin on log (3), then
rest the back half of log (6) over the pin on log (1)
Place log (5) over the pin on log (4)
5
and rear log as shown.
Place log (7) over the pin at the top of log (6) and
rest the tip of the log on the dimple of the burner top.
Place log (8) on
burner as shown.
Log
Description
1 Rear Log
2 Bottom Left Log
3 Bottom Right Log
4 Top Left Log
5 Top Left Cross Log
6 Top Right Cross Log
7 Top Right Log
8 Front Log
Step 3
8 (See Step 4 On SYM-40)
Step 4
6
7