Lennox Hearth Products Symmetry SYM-35N Care And Operation Instructions Manual page 15

4
1
2
Align the two holes at the bottom of log (1) over
1
the two tabs on the burner
Placement tabs Spread Glowing Embers
for log (2) (Rockwool) As Shown
Step 1
Pins on log (2) used
with log (4) in Step 3.
Align the slots at the bottom of logs (2) and
2
(3) over the log tabs on the left and right side
of the burner
Step 2
Figure 12
SYM-40 LOG PLACEMENT
6
5
7 3
Placement tabs
for log (3)
Pin on log (1) used
with log (6) in Step 3.
3
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Log
Number
1 Rear Log
2 Bottom Left Log
3 Bottom Right Log
4 Top Left Log
5 Top Right Log
6 Top Right Cross Log
7 Front Log
Catalog Number for the entire
log set: H6956
First place log (6) over the pin on log (3), then
rest the back half of log (6) over the pin on log (1)
Place log (4) over the pins on log (2)
4
as shown.
Step 3
Place log (5) over the pin at the top of
log (6) and rest the tip of the log on the
burner dimple as shown.
Place log (7) on left side of V-Bracket and rotate
counterclockwise the bottom of the log until it
touches the right side of the bracket.
Step 4
Description
6
5
7
15