Lennox Hearth Products Symmetry SYM-35N Care And Operation Instructions Manual page 14

1
2
Align the two holes on the bottom of log (1) over
1
the two tabs at the back of the burner
Placement tabs
for log (2)
Placement pin for one of three front logs (5) in Step 3.
Align the slots at the bottom of logs (2) and
2 (3) over the log tabs on the left and right side
of the burner
Figure 11
14
5
Spread Glowing Embers Placement tabs
(Rockwool) As Shown
Step 1
Step 2
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
SYM-35 LOG PLACEMENT
4
3
Place log (5) over the
5
pin on log (2) as shown.
Swing the front of the log
clockwise, to the dimple
for log (3)
on the top of the burner.
Position log (5) on burner
5
as shown. (See Step 4 On
3
SYM-40)
Log
Number Description
1 Rear Log
2 Bottom Left Log
3 Bottom Right Log
4 Top Right Log
5 Front Log (3)
Catalog Number for the entire
log set: H6953
Place log (4) on log (3) with the front
of the log touching the front of log (5),
resting on the burner top.
Tab for placing log (5)
as shown in Step 4.
Step 3
5
Step 4
4
Position log (5)
on tab as shown.