Advertisement
QuickSpecs
Technical Specifications
Drive LED Indicators
Drive LED Indicators
Drive LED Indicators
Drive LED Indicators
© Copyright 2006 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel
Corporation. Unix is a registered trademark of The Open Group.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
Tape Ready Signal
Tape Ready Signal
Tape Ready Signal
Tape Ready Signal
Tape Loading Signal
Tape Loading Signal
Tape Loading Signal
Tape Loading Signal
Tape Activity Signal
Tape Activity Signal
Tape Activity Signal
Tape Activity Signal
Media Caution Signal
Media Caution Signal
Media Caution Signal
Media Caution Signal
Error Condition Signal
Error Condition Signal
Error Condition Signal
Error Condition Signal
OBDR Signal
OBDR Signal
OBDR Signal
OBDR Signal
DA - 11883
Worldwide — Version 15 — March 20, 2006
Tape LED
Tape LED
Tape LED
Tape LED
Clean LED
Clean LED
Clean LED
Clean LED
On steady
Off
Flashing slowly
Off
Flashing rapidly
Off
Off or
Flashing slowly If the media caution signal is displayed:
flashing
Off
On steady
Both flashing slowly
in an alternating pattern
HP StorageWorks DAT Drives
HP StorageWorks DAT Drives
HP StorageWorks DAT Drives
HP StorageWorks DAT Drives
Meaning
Meaning
Meaning
Meaning
The data cartridge is loaded and the
drive is ready.
The cartridge is loading or unloading, or
power-on self-test is in progress
The cartridge is loaded, activity is
occurring.
Wait for the current operation to
finish, then insert a different tape
and repeat the operation that was
being performed.
If the media caution signal does
not show this time, it indicates that
the original cartridge was nearing
the end of its useful life. Copy any
data you want to keep from the
original tape onto a new tape if
possible, and then discard the old
tape.
If the media caution signal
appears again with the second
tape, the tape heads need
cleaning.
If the media caution signal
appears after using a cleaning
cartridge, the cleaning cartridge
has probably expired and should
be discarded.
HP DAT drives perform a comprehensive
self-test during power-up. If a hard error
causes the self-test to fail, the clean light
changes to steady amber. Run HP Library
& Tape Tools to help diagnose the
problem.
The tape drive is in disaster recovery
mode, restoring the operating system.
Page 28
Advertisement
