Setting Up Your French Door Refrigerator; Getting Ready To Install The Refrigerator - Samsung RFG237 Series User Manual

Setting up your French Door Refrigerator

GETTING READY TO INSTALL THE REFRIGERATOR

Congratulations on your purchase of the Samsung French Door Refrigerator. We hope you enjoy the state-of-art
features and efficiencies that this new appliance offers.
Selecting the best location for the refrigerator
• A location with easy access to the water supply.
• A location without direct exposure to sunlight.
• A location with a leveled floor.
• A location with enough space for the refrigerator doors to open easily.
• Allow sufficient space to the right, left, back and top for air circulation.
If the Refrigerator does not have enough space, the internal cooling
system may not work properly.
• Please ensure that appliance can be moved freely in the event of
maintenance & service.
If your refrigerator has an ice maker, allow extra space at the back for the water line connections.
When you install the refrigerator next to a fixed wall, minimum clearance is 3 ¾" (95mm) between the refrigerator
and wall to allow the door to swing open.
First thing! Make sure that you can easily move your refrigerator to its final location by measuring doorways
(both width and height), thresholds, ceilings, stairways, etc.
The following chart details the exact height and depth of Samsung
French Door Refrigerator.
Depth
Model
"A"
RFG238** /
28"
RFG237**
(712 mm)
• Allow clearance to the right, left, back and top when installing.
This will help reduce power consumption and keep your energy bills lower.
• Do not install the refrigerator where the temperature will go below 10℃.
• Do not locate the refrigerator where it may become wet.
When moving your refrigerator
To prevent floor damage be sure the front adjusting
CAUTION
legs are in the up position(above the floor).
Refer to 'Adjusting the doors' in the manual
(on page 15).
FLOORING
For proper installation, this refrigerator must be placed on a leveled
surface of hard material that is the same height as the rest of the
flooring. This surface should be strong enough to support a fully loaded
refrigerator. To protect the finish of the flooring, cut a large section of the
cardboard carton and place under the refrigerator where you are working.
When moving a refrigerator, it is needed to pull and push in the back-and-
forth direction.
8_ Setting Up
DA68-01827C-16.indb 8
Width Height Overall
"B" "C" Height "D"
35 6/8" 68 1/2" 69 6/8"
(908 mm) (1740 mm) (1774mm)
2 inch
2 inch
B B
A A
Depth
E E
"E"
C C
30 1/2"
(774 mm)
Flat-blade screw driver(-) Control Lever
3 inch
3/4
D D
2013. 12. 10. 5:00