Seat Heaters - Acura 2004 MDX Owner's Manual

Main Menu Table of Contents

SEAT HEATERS

Both front seats are equipped with
seat heaters. The ignition switch
must be in the ON (II) position to
use them. Push the front of the
switch, HI, to rapidly heat up the seat.
After the seat reaches a comfortable
temperature, select LO by pushing
the back of the switch. This will keep
the seat warm.
In HI, the heater turns off when the
seat gets warm, and turns back on
after the seat's temperature drops.
In LO, the heater does not cycle with
temperature change.
Because of the sensors for the side
airbag system, there is no heater in
the passenger's seat-back.
Seat Heaters
Follow these precautions when using
the seat heaters:
Use the HI setting only to heat the
seats quickly, because it draws
large amounts of current from the
battery.
If the engine is left idling for an
extended period, do not use the
seat heaters, even on the LO
setting. It can weaken the battery,
causing hard starting.
Instruments and Controls
89