Table of Contents
Advertisement
Main Menu
Table of Contents
Parking Brake, Mirrors
Parking Brake
PARKING BRAKE PEDAL
To apply the parking brake, push the
pedal down with your foot. To
release it, push on the pedal again.
The parking brake indicator on the
instrument panel should go out when
the parking brake is fully released
with the engine running (see page
59
).
NOTICE:
Driving the vehicle with the
parking brake applied can damage the
rear brakes and axles. A beeper will
92
Instruments and Controls
sound if the vehicle is put into gear
with the parking brake on.
Mirrors
SENSOR
INDICATOR
AUTO SWITCH
Keep the inside and outside mirrors
clean and adjusted for best visibility.
Be sure to adjust the mirrors before
you start driving.
The inside mirror can automatically
darken to reduce glare. To turn on
this feature, press the button on the
bottom of the mirror. The AUTO
indicator comes on as a reminder.
When it is on, the mirror darkens
when it senses the headlights of a
vehicle behind you, then returns to
normal visibility when the lights are
gone. Press the button again to turn
off this sensing.
Advertisement
Chapters
Table of Contents
