Climate Control System; Seat Heaters And Ventilation - Acura 2016 TLX Owner's Manual

VEHICLE CONTROLS

Climate Control System

Set your preferred interior temperature by selecting the proper mix of heated
or cooled air and fan speed. Use the On-Demand Multi-Use Display (ODMD) or
buttons to operate the system.
On-Demand Multi-Use Display (ODMD)
When you select a climate control icon, a new screen appears where you can
make adjustments or change settings.
Airflow
control mode
Driver's side
temperature
AC: Turn the air conditioning on or off.
SYNC: Set the passenger's side temperature
to the same as the driver's side.
Climate control buttons
AUTO button: Press, then
adjust the temperature to
Driver's side
your preferred setting.
temperature
switch
ON/OFF Windshield
button defroster
button
Climate control operation is affected during auto idle stop operation* (see page 82).
42 |
Shortcuts
(Climate tab):
Store or select
two climate
control settings.
Passenger's side
temperature
Recirculation/
Fan
fresh air mode
speed
Passenger's side
temperature
switch
Rear window
defogger/heated
mirror button
*if equipped

Seat Heaters and Ventilation*

Quickly warm or cool the seats when the vehicle is on.
Front Seat Heaters or Ventilation*
Use the On-Demand Multi-Use Display (ODMD) to operate the front seat
heaters or ventilation.
Close the
menu.
-: Decrease
heating or
cooling levels.
OFF: Turn the
seat heaters off.
When the vehicle is turned off, the heating or cooling setting returns to off at the
next vehicle start. If AUTO is selected, the setting remains in AUTO.
Rear Seat Heaters*
Canadian models
Use the buttons on the rear of the center console
to operate the rear outer seat heaters.
Press either seat heater button to toggle through
the HI, MID, LO, or OFF settings. The appropriate
indicator appears for each setting.
WARNING
Heat-induced burns are possible when using seat heaters.
Persons with a diminished ability to sense temperature (e.g., persons with
diabetes, lower-limb nerve damage, or paralysis) or with sensitive skin
should not use the seat heaters.
VEHICLE CONTROLS
ODMD screen
Select to enter the
seat heating screen.
Select LO, MID,
or HI level.
+: Increase
heating or
cooling levels.
AUTO*: The
system selects
the best setting
based on ambient
temperature.
*if equipped
| 43