Measuring bearing and distance between any two points:
1) From the Map Page, press the MENU Key.
2) Touch Measure Distance.
3) Touch any point on the viewable navigation map.
4) If desired, touch Set Ref to set a reference point.
TOPOGRAPHY
Topographic data can be displayed or removed as described in the following
procedures.
Displaying/removing topographic data:
1) From the Map Page, press the MENU Key.
2) Touch Topo Shading.
190-01754-00 Rev. A
Map Page (Measure Distance)
Topographic Shading (Map Page)
Garmin G3X Touch Pilot's Guide
GPS Navigation
Reference
Point
Measurement
Line
91