Topography - Garmin Cirrus Perspective SR20 Pilot's Manual

TOPOGRAPHY

All navigation maps can display various shades of topography colors representing land elevation, similar to
aviation sectional charts. Topographic data can be displayed or removed as described in the following procedures.
Topographic data can also be displayed on the selectable profile map at the bottom of the navigation map.
Displaying/removing topographic data on all pages displaying navigation maps:
1) Press the MAP Softkey (the INSET Softkey for the PFD Inset Map).
2) Press the TOPO Softkey.
3) Press the TOPO Softkey again to remove topographic data from the Navigation Map. When topographic data
is removed from the page, all navigation data is presented on a black background.
Displaying/removing topographic data (TOPO DATA) using the Navigation Map Page Menu:
1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the 'Map Setup' option.
2) Press the ENT Key. The Map Setup Menu is displayed.
3) Select the 'Map' group.
4) Press the ENT Key.
5) Highlight the 'TOPO DATA' field.
6) Select 'On' or 'Off'.
7) Press the FMS Knob to return to the Navigation Map Page.
190-00820-08 Rev. A
TOPO Off
Figure 5-14 Navigation Map - Topographic Data
Cirrus Perspective by Garmin – Pilot's Guide for the SR20/SR22/SR22T
™
Navigation Map
Topographic Data
Navigation Map
Black Background
TOPO Softkey
Not Enabled
Topographic Data
on Profile Map
TOPO Softkey
Enabled
FLIGHT MANAGEMENT
TOPO On
167