Plug And Play Capability; Lcd Monitor Quality And Pixel Policy; Cleaning Your Monitor; Maintenance Guidelines - Dell G2410H User Manual

19 TMDS Ground
20 Floating
21 Floating
22 TMDS Ground
23 TMDS Clock+
24 TMDS Clock-

Plug and Play Capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display
Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor
installations are automatic; you can select different settings if desired. For more information about changing the monitor settings, see

LCD Monitor Quality and Pixel Policy

During the LCD monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed
pixel that appears as an extremely tiny dark or bright discolored spot. In almost every case, these fixed pixels are hard to see and do not detract from display
quality or usability. A display with 1 to 5 fixed pixels is considered normal and within competitive standards. For more information, see Dell Support site at:
support.dell.com.

Maintenance Guidelines

Cleaning Your Monitor

CAUTION: Read and follow the
CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.
For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:
To clean your antistatic screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the
l
antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
Use a lightly-dampened, warm cloth to clean the monitor. Avoid using detergent of any kind as some detergents leave a milky film on the monitor.
l
If you notice white powder when you unpack your monitor, wipe it off with a cloth.
l
Handle your monitor with care as dark-colored monitors may scratch and show white scuff marks more than light-colored monitors.
l
To help maintain the best image quality on your monitor, use a dynamically changing screen saver and turn off your monitor when not in use.
l
Back to Contents Page
safety instructions before cleaning the monitor.
Operating the Monitor.