Dell G2410H User Manual page 33

scrambled
or appears
torn
Safety Related Issues Visible signs
of smoke or
sparks
Intermittent Problems Monitor
malfunctions
on & off
Missing Color Picture does
not have
color
Wrong Color Picture color
is not good
Image retention from a static Faint
image left on the monitor for a shadow
long period of time from the
static image
displayed
appears on
the screen
Perform Auto Adjust using the OSD.
l
Adjust Phase and Pixel Clock controls using the OSD.
l
Perform monitor self-test feature check to determine if scrambled screen appears in self-test mode.
l
Check for bent or broken pins in the video cable connector.
l
Restart the computer in the safe mode.
l
Do not perform any troubleshooting steps.
l
Contact Dell immediately.
l
Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.
l
Reset the monitor to Factory Settings.
l
Perform monitor self-test feature check to determine if the intermittent problem occurs in self-test mode.
l
Perform monitor self-test feature check.
l
Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.
l
Check for bent or broken pins in the video cable connector.
l
Change the Color Setting Mode in the Color Settings OSD to Graphics or Video depending to the
l
application.
Try different Color Preset Settings in Color Settings OSD. Adjust R/G/B value in Color Settings OSD if the
l
Color Management is turned off.
Change the Input Color Format to PC RGB or YPbPr in the Advance Setting OSD.
l
Run the built-in diagnostics.
l
Use the Power Management feature to turn off the monitor at all times when it is not in use (for more
l
information, see Power Management Modes).
Alternatively, use a dynamically changing screensaver.
l