Back
Press
Horizontal Po
Use the
sition
NOTE:
Vertical Posit
Use the
ion
NOTE:
Sharpness
This feature can make the image look sharper or softer. Use
Pixel Clock
T
he Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.
Use the
Phase
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again.
NOTE:
Dynamic
The Dynamic Contrast adjustment helps the user to get a higher contrast if you choose Game preset, Movie Preset, Sports Preset and Nature Preset.
Contrast
(Brightness control is disabled while in Dynamic Contrast mode and will be grayed out.)
Use the
Use the
NOTE:
Display Reset Reset the image to the original factory setting.
Exit Menu
Press
OTHER
SETTINGS
to go back to the main menu.
and
buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
When using a DVI source, the Horizontal Position setting is not available.
and
buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
When using a DVI source, the Vertical Position setting is not available.
and
buttons to adjust for best image quality.
Pixel Clock and Phase Adjustments are only available for "VGA" input.
button to enable the Dynamic Contrast adjustment.
button to disable the Dynamic Contrast adjustment.
Dynamic Contrast is not available (greyed out) in Energy Smart Plus and Energy Smart modes.
to exit the OSD main menu.
or
to adjust the sharpness from '0' to '100'.