Cd/Dvd Drive; Removing A Cd/Dvd Drive - Dell DIMENSION XPS GEN 3 WHL User Manual

3
Attach the power and data cables to the floppy drive.
4
Connect the other end of the data cable to the connector labled FLOPPY on the system
board (see page 69).
5
Check all cable connections, and fold cables out of the way to provide airflow for the fan and
cooling vents.
6
Close the computer cover (see page 108).
NOTICE:
the computer.
7
Connect your computer and devices to electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software
required for drive operation.
8
Enter system setup (see page 113) and update the appropriate Diskette Drive option.
9
Verify that your computer works correctly by running the Dell Diagnostics (see page 50).

CD/DVD Drive

CAUTION:
located in the Product Information Guide.
CAUTION:
before opening the cover.

Removing a CD/DVD Drive

1
Follow the procedures in "Before You Begin" on page 61.
2
Disconnect the power and data cables from the back of the drive.
92
Removing and Installing Parts
To connect a network cable, first plug the cable into the network wall jack and then plug it into
Before you begin any of the procedures in this section, follow the safety instructions
To guard against electrical shock, always unplug your computer from the electrical outlet