Displaying Configuration Files - Cisco MDS 9020 Configuration Manual

Chapter 3 Initial Configuration
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Displaying Configuration Files

Use the show running-config command to view the running configuration file.
switch# show running-config
ip default-gateway 10.20.83.1
logging level fcdomain 2
logging level fspf 2
logging level fcns 2
logging level fcs 2
logging level port 2
logging level zone 2
logging level auth 2
logging level ipconf 2
logging level module 2
logging level ntp 2
logging level sysmgr 2
no snmp-server contact
no snmp-server location
zone name asdfa
zoneset name dave
interface mgmt0
ip address 10.20.83.122 255.255.255.0
interface fc1/1
interface fc1/2
interface fc1/3
interface fc1/4
interface fc1/5
interface fc1/6
interface fc1/7
interface fc1/8
interface fc1/9
interface fc1/10
interface fc1/11
interface fc1/12
interface fc1/13
interface fc1/14
interface fc1/15
interface fc1/16
interface fc1/17
interface fc1/18
interface fc1/19
interface fc1/20
Use the show startup-config command to view the startup configuration file.
switch# show startup-config
interface fc1/1
interface fc1/2
interface fc1/3
interface fc1/4
OL-6988-02
no shutdown
Auto
no shutdown
Auto
no shutdown
Fx
no shutdown
Auto
Cisco MDS 9020 Fabric Switch Configuration Guide and Command Reference
Working with Configuration Files
3-17