Setting The Drive Mode - HP PC460T User Manual

Setting the Drive Mode

This camera features a Self-timer and Burst function which can be set in the Drive mode function on the screen.
The Self-timer allows you to take photos after a pre-defined delay. While burst lets you take consecutive shots. This
function is only available in recording still images. The Drive mode setting is automatically set to off when you turn
off the camera.
To activate Drive mode:
• Tap the on-screen Drive icon to display the popup drive mode menu and tap the desired icon.
The table below shows the available Drive mode settings.
Icon Item
10 Sec Self-timer
2 Sec Self-timer
Double Self-timer
Burst
Speedy Burst
Off
Tap operation is disabled during drive mode.
Description
Sets a 10-second delay to capture image after pressing the Shutter button
.
Sets a 2-second delay to capture image after pressing the Shutter button
.
Performs delay and capture twice:
• Performs a 10-second delay, then captures the image.
• Performs another 2-second delay then captures the image again.
Performs continuous shooting when the Shutter button
Stops shooting when the Shutter button
Captures 30 images in a shot when the Shutter button
Auto set Image size to VGA only.
Captures an image without time delay.
27
is pressed.
is released.
is pressed.