Model Uir48 - 48" Ranges - U.S. Range UIR36C Installation And Operation Manual

INSTALLATION Continued
Model UIR48 – 48" Ranges
DETAIL
I
Figure 2 – With area detail defi ned for 48 inch ranges.
1. Remove screws (a total of 10) from back of oven on both
sides of the range (detail I) and center (detail II) as shown
for each range model:
REMOVE
2 SCREWS
BOTH SIDES
DETAIL I
48" RANGES WITH
STANDARD OR CONVECTION OVENS
AND STORAGE
REMOVE
2 SCREWS
(BOTH SIDES)
FOR 48" RANGES
WITH 2 SPACE SAVER OVENS
Part # 4523974 Rev 2 (05/06/14)
DETAIL
II
48" RANGE
REMOVE
1 SCREW
(BOTH SIDES)
REMOVE
1 SCREW
(BOTH SIDES)
DETAIL I
REMOVE
2 SCREWS
DETAIL II 48" RANGES
WITH STANDARD OVEN AND STORAGE
REMOVE
2 SCREWS
(IF REQUIRED)
DETAIL II 48" RANGES
WITH CONVECTION OVEN AND STORAGE
REMOVE
2 SCREWS
DETAIL II
FOR 48" RANGES
WITH 2 SPACE SAVER OVENS
2. For all 48" ranges install the left and right support
brackets (part # 4523226 and 4523227) by re-inserting
the 2 screws removed in step 1 and one additional screw
(on both sides of the range).
INSERTED
SCREWS
REMOVE
2 SCREWS
REMOVE
2 SCREWS
IF REQUIRED
REMOVE
2 SCREWS
DETAIL I
ALL 48" RANGES
Page 11