Toshiba 19DV615Y Owner's Manual page 23

Main
Selected items
menu
Setup Language
1
Timer Setting*
2
Password Setup*
Version
Vertical Position
3
Auto 4:3 Default*
2
Display Setup*
Auto Shut Off
4
AV Colour*
Reset
*1 Timer Setting option can be configured only when the TV tuner input is set to DTV mode.
*2 The Password Setup and Display Setup option can be configured only when the TV tuner input is set to DTV mode.
*3 Auto 4:3 Default is available only for AUTO picture size setting.
In Component mode, AUTO 4:3 Default is available only for 480i/576i mode.
*4 PAL is the colour system used in Australia. NTSC 3.58 is used in the USA, PAL 60 used in Germany handled video recorders, which play NTSC video
tape recording. If the picture shows horizontal stripes, set to Auto.
Other convenience functions
See page 13.
View the current time settings. See page 24.
Set password for TV programmes and movies.
View the hardware and software version information.
When the Cinema mode is selected (see page 21), you can adjust the vertical pic-
ture position. Press
and downwards by up to -10.
4:3/16:9 This option selects the default way that a 4:3 signal is shown - either as normal
"4:3" or expanded in the "16:9" mode, according to your preferences.
See page 24.
On/Off This option automatically shuts the TV off after 15 minutes of non-operation when
the last viewed TV channel stops broadcasting.
Auto/ The AV Colour setting only applies when viewing devices connected to the AV
PAL/ inputs.
SECAM/
NTSC4.43/
NTSC3.58/
PAL60
Select "Reset" to reset TV settings to the factory preset values.
(1) Press ENTER/CH LIST
/
(2) Press
(3) Reset the TV function will now begin, and this unit will automatically turn off.
As the power is not automatically turned on, press
Setup hint
/
to adjust the vertical position of the picture by up to +10
to enter the Reset TV setting screen.
to select "Yes", then press ENTER/CH LIST
(continued)
.
to watch TV.
23