Network Settings - PURE ONE Flow Owner's Manual

Wi-Fi settings
Connection wizard
View details
Manual setup

Network settings

Press Options from either The Lounge or Media player, then select
options for configuring your network connections.
Connection wizard
Scan for wireless networks to connect to. See your radio's Quickstart Guide for instructions.
View details
Displays the configuration of the wireless network that your radio is connected to:
Network name (Wi-Fi) The Network Name (SSID) is shown at the top of the screen.
Encryption (Wi-Fi) The encryption method is listed (WEP, WPA or WPA2).
IP address IP address of the radio.
Net mask (Wi-Fi) The configured network mask.
DNS (Wi-Fi) Domain Name Server IP address.
Router (Wi-Fi) Gateway router IP address.
Radio Name Name of the radio
MAC address (Wi-Fi) MAC address of the radio (a fixed address that identifies your radio).
Access point (Wi-Fi) MAC address of the wireless router that the radio is connected to.
Manual setup
Manually configure your wireless network settings (for advanced users only).
Retry connection Attempts to reconnect to the selected network.
Network name Scan for networks
wireless network.
Encryption mode Change the encryption mode between WEP,
None. ONE Flow automatically detects the mode for your network. Only
change this setting if you think the encryption mode is incorrect.
Key or password Enter a new encryption key or password.
IP address Choose between
Clear network settings
ONE Flow will delete all previous Wi-Fi connections, passwords and settings and perform a fresh
scan for available networks.
Select network type
Choose between Wi-Fi or Ethernet
type.
or Enter SSID manually
DHCP (dynamic) or Static.
connection. This will reset your radio's network connection
Network settings to view
to specify a new SSID for your
WPA (PSK), WPA2 (PSK) or
13