Rear Panel Controls - Laney A1 User Manual

Laney
1 2

REAR PANEL CONTROLS

1
Power inlet socket. Connect to your power source. Make sure the specified voltage is correct for your country!
This drawer contains the main safety fuse for the unit.
2
USE ONLY THE CORRECT SIZE AND RATING OF FUSE AS SPECIFIED ON THE PANEL.
The mains fuse ratings are detailed in the specs section at the rear of this manual.
Serial Number and model of your unit.
3
4
Socket for connecting a pair of quality headphones. When in use, the internal loudspeaker is automatically muted.
5
Connect your external electronic tuner here. This signal is taken before the mute/volume stages allowing silent tuning. (Ch 1 only)
FX Send socket provided for connecting to external effects units input socket. You can also use the send socket as a line out
6
if you wish.
Connect the output of your external effects unit here. Any external effects device used here will affect both channels of the
7
A1. Can be used in addition to the onboard digital effects.
3 4
OPERATING INSTRUCTIONS
5 6 7
Page 10 /16