Pin Connections - Laney A1 User Manual

Laney
FRONT PANEL CONTROLS - continued
Assigns the chosen effect ( ) to channel 2.
30
Sets the level from the onboard digital effects section, present in the overall mix.
31 1
The onboard digital effects have been custom designed by Laney to complement the A1. You have a choice of delays, flange,
32
rotary, octave, chorus, reverb and combinations of these. Select the chosen effect here, and set the level with
This XLR socket provides a low impedance output for direct injection of the amplifier signal to a mixing desk or power
33
amplifier. It is taken after the main mix stage, but prior to the main volume control.
When 'on' Indicates that power is connected to the unit and it is ready to go.
34
(Always switch off and disconnect the power cord when not in use)
35
Main power switch for the unit.

PIN CONNECTIONS

Mic in XLR Mic in XLR
32
3 3 1 1
2 2
1 1 3 3
2 2
DI Out XLR DI Out XLR
OPERATING INSTRUCTIONS
1 1 2 2
Input/Output Jacks Input/Output Jacks
Pin 1 = Gnd Pin 1 = Gnd
Pin 2 = Hot Pin 2 = Hot
Pin 3 = Cold Pin 3 = Cold
31
Page 9 /16