Wireless Operating Modes; Switching Between Operating Modes; Mode; 3.2.5.2 A - EnGenius 11N Wireless Gigabit Multi-Function Client Bridge User Manual

Multi-Function Gigabit Wireless-N Client Bridge

3.2.5 Wireless Operating Modes

Click on the Wireless link on the navigation drop-down menu. In this section you
may select the operating mode of the device. Options available are: Access Point,
Client Bridge, WDS, or Repeater. Each operating mode is described in detail below.
3.2.5.1
Each of the operating modes offers different features. In order to switch the operating
mode, select it from the drop down list.
A dialog box will appear to notify you that the system will restart in order for the
change to take effect. Click on the OK button to continue.
Please wait while the device counts down and restarts into the new operating mode.
Each of the operating modes is described in detail in this chapter. Refer to the
following sections for each operating mode:
3.2.5.2 Access Point Operating Mode
o
3.2.5.3 Client Bridge Operating Mode
o
3.2.5.4 WDS Bridge Operating Mode
o
3.2.5.5 Repeater Operating Mode
o

Switching between Operating Modes

Version 1.0
16