Wpa (Wi-Fi Protected Access) / Pre-Shared Key - EnGenius 11N Wireless Gigabit Multi-Function Client Bridge User Manual

Multi-Function Gigabit Wireless-N Client Bridge
Information Interchange - alphanumeric characters) format. ASCII format is provided
so you can enter a string that is easier to remember.
WEP Key 1-4: You may enter four different WEP keys.
Enable 802.1x Authentication: Place a check in this box if you would like to use
RADIUS authentication. This option works with a RADIUS Server to authenticate
wireless clients. Wireless clients should have established the necessary credentials
before attempting to authenticate to the Server through this Gateway. Furthermore, it
may be necessary to configure the RADIUS Server to allow this Gateway to
authenticate users. You will then be required to specify the RADIUS Server's IP
address, port, and password.
Click on the Apply button to save the changes.
3.2.5.5.4.3
Click on the Security link under the Wireless drop-down menu.
WPA (Wi-Fi Protected Access) is designed to improve upon the security features of
WEP (Wired Equivalent Privacy). The technology is designed to work with existing
Wi-Fi products that have been enabled with WEP. WPA provides improved data
encryption through the Temporal Integrity Protocol (TKIP), which scrambles the keys
using a hashing algorithm and by adding an integrity checking feature which makes
sure that keys haven't been tampered with.
ESSID Selection: As this device supports multiple SSIDs, it is possible to configure
a different security mode for each SSID (profile). Select an SSID from the drop-down
list.
Broadcast SSID: Select Enable or Disable from the drop-down list. This is the SSID
broadcast feature.
broadcast to anyone within the range of your signal
they could connect to your network. When this is disabled, you must enter the
Wireless Network Name (SSID) on the client manually to connect to the network.
WMM: Choose to Enable or Disable WMM. This is the Quality of Service (QoS)
feature for prioritizing voice and video applications. This option can be further
configured in WMM under the Wireless drop-down menu.
Encryption: Select WPA pre-shared key from the drop-down list.
WPA Mode: Select the Auto WPA / WPA2 from the drop-down list.
WPA (Wi-Fi Protected Access) / Pre-shared
Key
When this option is set to Enable, your wireless network name is
. If you're not using encryption then
Version 1.0
51