Multi-Function Gigabit Wireless-N Client Bridge
3.2.5.3
3.2.5.3.1 Status
Click on the Status link under the Wireless drop-down menu. This page will display
the current wireless settings such as SSID, Channel, Security and BSSID (MAC
address)
3.2.5.3.2 Basic
Click on the Basic link under the Wireless drop-down menu. This page will display
the current wireless settings such as SSID, Channel, Security and BSSID (MAC
address).
Client Bridge Operating Mode
In order to configure the device as an Access
Point, select Client Bridge from the Operating
Mode drop-down list.
A dialog box will appear to notify you that the
system will restart in order for the change to take
effect. Click on the OK button to continue.
Please wait while the device counts down and
restarts into the new operating mode.
Once the device has restarted into Client Bridge
mode, you will see a new drop-down menu with
six options which are: Status, Basic, Security, AP
Profile, and WMM. Each of the options is
described in detail below.
Version 1.0
28