Removing a Frequency from User Memory
You may edit the contents of User memory to remove its
stored frequencies when you want to make a change or
you receive a "MEM Full" message.
1. Press RCL. Turn the Large knob to the
2. Press MEM. Turn Large knob to show
3. Turn the Small knob to choose the
4. Press MEM to remove the frequency.
Replacing a Frequency from User Memory
You may edit the contents of User memory to replace its
stored frequencies when you want to make a change or
you receive a "MEM Full" message.
1. Select the desired new frequency with
2. Press RCL. Turn the Large knob to the
3. Press MEM. Turn Large knob to show
4. Turn the Small knob to choose the
5. Press MEM to replace the displayed
User (MEM) frequencies.
"Remove."
frequency to Remove.
Or, turn the Large knob to "Abort" and
press MEM to cancel and leave memory
as it was.
the Large and Small knobs.
User (MEM) frequencies.
"Replace."
frequency to Replace.
stored frequency with the current
Standby frequency. Or, turn the Large
knob to "Abort" and press MEM to
cancel and leave memory as it was.
Basic Operation
7