Auto Stack List (Lst); User Stored Frequencies (Mem) - Garmin Apollo SL40 User Manual

TWR- Tower frequency
GND - Ground frequency
ATS - ATIS frequency
ATF - Air Traffic Frequency
APP - Approach
ARR - Arrival
AWS - Automatic Weather Station
CLR- Clearance/Delivery
CTF- Common Traffic Advisory Frequency
DEP - Departure frequency
FSS - Flight Service Station
RFS - Remote Flight Service Station
UNI - Unicom frequency
MF - Mandatory Frequency

Auto Stack List (LST)

The SL40 keeps track of the last eight Active
frequencies and stores them in a stack. Duplicate
frequencies are not stored.
119.10 LST121.80

User Stored Frequencies (MEM)

When you press the MEM button the Standby frequency
is stored in User memory. The SL40 stores the last eight
frequencies selected by the user. After eight User
frequencies are stored, you will be prompted that the
stack is full (mem full). You may then remove or replace
the frequency, or abort the process. Duplicate
frequencies are not stored.
119.10 MEM121.80
119.10 MEM124.55
Press RCL and then turn the Large,
RCL
outer knob to display the Auto Stack
List (LST).
Then, turn the Small, inner knob to view
the stored frequencies. Frequencies are
shown in the order of use.
RCL
Press RCL and then turn the Large,
outer knob to reach the User
frequencies.
Turn the Small, inner knob to view the
User stored frequencies in numeric
order.
Basic Operation
5