HP Pavilion User Manual page 78

Configuring and Expanding Your Computer
Configuring the Pavilion Notebook with the BIOS Setup Utility
Parallel Port
Mode
Base I/O
address
DMA channel
Local Bus IDE
Adapter
Floppy disk
controller
CPU Serial
Number
Security Menu
User Password Is
Supervisor
Password Is
Set User Password
Set Supervisor
Password
78
Sets how the parallel port is
configured by the BIOS (specified or
automatic).
Sets the port to output only, bi-
directional, ECP mode, or EPP
mode.
Sets the I/O address.
When ECP mode is enabled, sets the
DMA channel.
Enables the primary (hard drive) and
secondary (CD-ROM drive)
controllers.
Enables the floppy disk drive.
Controls detection of processor serial
number.
Shows if a user password is set.
Shows if a supervisor password is
set.
Press ENTER to set, change, or
clear user password. Password
length can be no longer than 8
characters, 0-9, A-Z.
Press ENTER to set, change, or
clear supervisor password. This
password protects BIOS Setup
settings.
User's Guide
Enabled
ECP mode
378 IRQ7
DMA 0
Both
Enabled
Disabled
Default
Clear
Clear