Using your appliance
14
Setting and adjusting the time
After connecting your appliance or after a long period without it being connected to the mains,
12 : 00
the "
" button will flash on the display.
To set the time on the clock
Set the time using the + and - buttons then validate by
■
pressing the
When the time has to be changed
Press the
button then press
■
Program the new time (e.g. 7:30) using the + and - buttons.
Validate by pressing
■
A beep will be emitted to confirm that the new time has been
■
set.
Adjusting the contrast
Programming
Press the
button then a few seconds later press
■
until the indication
Adjust the contrast using the + or - buttons and validate
■
with the
button.
Timer function
Programming
You can program the "Timer" function of your oven. Press
■
the
button then
Adjust the programming time using the - / + buttons, for
■
example 1 minute. Validate by pressing
shows the time again but the countdown starts.
Once the time has ended, the timer emits a series of beeps
■
to warn you. These beeps can be stopped by pressing any
button.
button.
twice. The time will flash.
.
-CO-
appears on the display.
.
,
. The display
Display
1 2:0 0
0 6 :30
Display
0 6:3 0
0 7: 30
Display
Display