Setting A Route To Your Destination; Finding Your Destination By Selecting The Type Of Facility; Searching For Points Of Interest (Poi) - Pioneer CNDV-50MTP Operation Manual

Setting a Route to Your Destination

• For safety reasons, these route-setting
functions are not available while your
vehicle is in motion. To enable these func-
tions, you must stop in a safe place and
put on the parking brake before setting
your route.
❒ Some information on traffic regulations by
days or time depends on the time when the
route calculation is performed. Thus, the
information may not correspond with a cer-
tain traffic regulation when your vehicle actu-
ally passes the location. Also, the information
on the traffic regulations provided will be for a
passenger vehicle, and not for a truck/lorry or
other delivery vehicles. Always follow the
actual traffic regulations while driving.
❒ If you press the NAVI (or POS) button dur-
ing route calculation, the calculation is can-
celed and the map display appears.
Finding Your Destination by
Selecting the Type of Facility
Information about various facilities (Points Of
Interest - POI), such as gas stations, amusement
parks or restaurants is available. By selecting the
category (or entering the POI Name), you can
search for a Point Of Interest.
❒ You can also narrow down the search range
by initially specifying the name of the city or
area where your destination is located.
Searching for Points of Interest
(POI)
1
Touch "Destination" in the Main menu,
and then touch "POI Search".
2
Touch the zone code key of the destina-
tion and touch "OK".
➲ Selecting the zone where you want to
search ➞ Page 19
3
Touch "Category".
"Name" :
Touch this item if you want to specify the POI
Name at first.
"City" :
Touch this item if you want to specify the des-
tination city or area at first.
4
Touch the desired category.
POI's are divided into several categories.
If the category is not sub-divided into more
detailed categories, the list will not be dis-
played. Proceed to Step 6.
Chapter 2
Category
29