Combining And Using Pioneer Av Equipment; To Ensure Safe Driving - Pioneer CNDV-50MTP Operation Manual

When the installation is complete, the open-
ing display appears.
6
Press the NAVI/AV button to change the
navigation screen.
Some time is needed until navigation is ready.
7
Check the details of the cautionary mes-
sage and touch "OK".
8
To set the time difference, touch "+" or
"–".
The time difference between the time origi-
nally set in the navigation system (Pacific
Standard Time) and the current location of
your vehicle is shown. If necessary, adjust the
time difference. Touching "+" or "–" changes
the time difference display in one-hour incre-
ments. The time difference can be set from
+3 to –3 hours.
9
If necessary, set to summer time.
Daylight Saving Time (DST) is off by default.
Touch "Summer Time" to change the time if
you are in the daylight saving period. This
turns the display below DST "On".
58
Time difference
10
To complete the setting, touch "Back".
The map of your surroundings appears.
This completes the setup of your Navigation Sys-
tem. Chapter 1 explains the basic operation of
your Navigation System.
➲ To change the language and time later ➞
Page 51
Combining and Using Pioneer
AV Equipment

To Ensure Safe Driving

• To avoid the risk of an accident and the
potential violation of applicable laws, the
navigation system is not for use with a
video screen that is visible to the driver.
• In some countries or states the viewing of
images on a display inside a vehicle even
by persons other than the driver may be
illegal. Where such regulations apply, they
must be obeyed.