Save & Exit Setup - Protech Systems PMB-531LF User Manual

4-13. SAVE & EXIT SETUP
After you have completed adjusting all the settings as required, you must
remember to save these setting into the CMOS RAM. To save the settings,
select "SAVE & EXIT SETUP" and press <Enter>, a display will be shown
as follows:
►Standard CMOS Features
►Advanced BIOS Features
►Advanced Chipset Features
►Integrated Peripherals
►Power Management
►PnP/PCI Configura
►PC Health Status
Esc : Quit
F10 : Save & Exit Setup
When you confirm that you wish to save the settings, your system will be
automatically restarted and the changes you have made will be implemented.
You may always call up the setup program at any time to adjust any of the
individual items by pressing the <Del> key during boot up.
PMB-531LF USER
Phoenix - AwardBIOS CMOS Setup Utility
Save to CMOS and EXIT Y/N)? Y
Save Data to CMOS
'
S MANUAL
Chapter 4 Award BIOS Setup
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
word
etup
Saving
↑↓→← : Select Item
Page: 4-25