Technical Specifications - Intel DP43BF Classis Series Product Brief

Intel® Desktop Boards DP43BF and DP43BFL
Classic Series

Technical Specifications

ProceSSor
Processor Support
• Intel® Core™2 Quad** processors in the LGA775
package
• Intel® Core™2 Duo processors in the LGA775
package
• Intel® Pentium® processors in the LGA775 package
• Intel® Celeron® processors in the LGA775 package
• Supports Intel® 64 architecture 3
cHIPSeT
Intel® P43 express chipset
• Intel® 82P43 Graphics and Memory Controller Hub
(GMCH)
• Intel® 82801JR I/O Controller Hub (ICH10R) (DP43BF)
Intel® 82801JB I/O Controller Hub (ICH10) (DP43BFL)
• Intel® Fast Memory Access
Intel® I/o controller Hub (IcH)
• Five SATA ports (3.0 Gb/s)
• One eSATA port (3.0 Gb/s) (DP43BF)
• Integrated 10/100/1000 Network Connection
• Twelve Hi-Speed USB 2.0 ports (six back panel
ports and six additional ports via three internal
headers)
System BIoS
• 16 Mb Flash EEPROM with Intel® Platform
Innovation Framework for EFI Plug and Play,
IDE drive auto-configure
• Advanced configuration and power interface
V2.0b, DMI 2.0, multilingual support
• Serial Peripheral Interface (SPI) Flash
System resources and hardware (such as PCI and PCI Express*) require physical memory address locations that can reduce available addressable system memory. This could result in a reduction of as much
1
as 1 GB or more of physical addressable memory being available to the operating system and applications, depending on the system configuration and operating system.
Intel® High Definition Audio requires a system with an appropriate Intel® chipset and a motherboard with an appropriate codec and the necessary drivers installed. System sound quality will vary depending
2
on actual implementation, controller, codec, drivers, and speakers. For more information about Intel® HD Audio, refer to www.intel.com/design/chipsets/hdaudio.htm
64-bit computing on Intel® architecture requires a computer system with a processor, chipset, BIOS, operating system, device drivers, and applications enabled for Intel® 64 architecture. Processors will not
3
operate (including 32-bit operation) without an Intel 64 architecture-enabled BIOS. Performance will vary depending on your hardware and software configurations. See http://developer.intel.com/technology/
intel64/index.htm for more information.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS
IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY
EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY,
OR INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY RIGHT.
Intel products are not intended for use in medical, life-saving, or life-sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice.
All products, dates, and figures specified are preliminary based on current expectations, and are subject to change without notice. Availability in different channels may vary.
Actual Intel® Desktop Board may differ from the image shown.
Intel, the Intel logo, Intel Core, Pentium, and Celeron are trademarks of Intel Corporation in the U.S. and other countries.
* Other names and brands may be claimed as the property of others.
** Supports 95 W Thermal Design Power, Intel® Core™2 Quad Processors with 1333 / 1066 MHz system bus. For information, visit http://processormatch.intel.com
Copyright © 2010 Intel Corporation. All rights reserved. 0210/FZ/MS/PDF 323353-001US
SYSTeM MeMorY
Memory capacity
• Four 240-pin DIMM connectors supporting up to
four double-sided DIMMs (8 GB 1 max)
Memory Types
• DDR3 1333 / 1066 SDRAM memory support
• Non-ECC Memory
Memory Modes
• Dual- or single-channel operation support
Memory Voltage
• 1.35 V to 1.65 V
Hardware Management Features
• Processor fan speed control
• System chassis fan speed control
• Voltage and temperature sensing
• Fan sensor inputs used to monitor fan activity
• Power management support for ACPI 1.0b
expansion capabilities
• Four PCI bus add-in card connectors
• Two PCI Express* x1 bus add-in card connectors
• One PCI Express 2.0 x16 graphics connector
Headers
• One serial port header
• Two IEEE 1394a ports (one external port and
one additional port via internal header) (DP43BF)
Audio
• Ten-channel Intel® High Definition Audio codec
2
For ordering information, visit www.intel.com
For the most current product information, visit
http://developer.intel.com/products/desktop/motherboard/
JuMPerS AND FroNT PANeL coNNecTorS
Jumpers
• Single configuration jumper design
• Jumper access for BIOS maintenance mode
Front-Panel connectors
• Reset, HDD LED, Power LEDs, power on/off
• Front-panel Hi-Speed USB 2.0 headers
• Front-panel audio header
MecHANIcAL
Board Style
• ATX 2.2-compliant
Board Size
• 9.6" x 11.6" (24.38 cm x 29.46 cm)
Baseboard Power requirements
• ATX 12 V
eNVIroNMeNT
operating Temperature
• 0° C to +55° C
Storage Temperature
• -20° C to +70° C
reGuLATIoNS AND SAFeTY STANDArDS
united States and canada
CSA / UL 60950-1, First Edition (Binational Standard)
europe
(Low Voltage Directive 2006 / 95 / EC)
EN 60950-1
International
IEC 60950-1
eMc regulations (tested in representative chassis)
united States
FCC 47 CFR Part 15, Subpart B
canada
ICES-003 Class B
europe
(EMC Directive 2004 / 108 / EC)
EN 55022 and EN 55024
Australia / New Zealand
EN 55022 Class B
Japan
VCCI V-3, V-4 Class B
South Korea
KN-22 and KN-24
Taiwan
CNS 13438 Class B
International
CISPR 22 Class B
environmental compliance
europe
Europe RoHS (Directive 2002 / 95 / EC)
china
China RoHS (MII Order # 39)