Local Management - Intel Express 9545 Quick Start Manual

Local Management (optional)
Local Management is an on-board, menu-based
management interface that supports full monitoring
and configuration capabilities. You can use Local
Management as an alternative to Intel Device View.
For more details on using Local Management, see the
user guide.
To Access Local Management through the
Console Port
• Use the supplied terminal cable to connect the
router console port to a VT100-compatible
terminal or the serial port of a PC running terminal
emulation software (such as HyperTerminal*). See
Table 2 for the correct serial port settings.
• Press E to display the Local Management
Login screen (see Figure 12).
• Select Administrator and press E twice to
display the main screen. By default, no password is
assigned.
Note If the console port is currently configured
for a dial-up modem, you cannot use it for
Local Management until configuring the port
for a terminal connection. See the user guide
for details.
To Access Local Management Remotely
using Telnet
• Telnet to the IP address of the router from a
terminal on the LAN, or over a WAN connection
to the router.
• The router’s default IP address is 192.0.2.1 with a
subnet mask of 255.255.255.0. A terminal on the
LAN must have the same network number as the
router. For example, in Figure 13, the terminal on
the same LAN as the router has an IP address of
192.0.2.2.
12
Router
Figure 11. Connect to the Console Port.
Parameter
Baud
Data bits
Parity
Stop bits
Flow Control
Table 2. Serial Port Settings.
Figure 12. Local Management Login Screen. Use the
W Z keys on your keyboard to select an option and
press E, or type the underlined letter of the option.
Express Router
being configured
( default IP address 192.0.2.1)
Input
5.1VDC/2.6A
Hub PC
Recovery
II X
Power ISDN U HDSL2 LAN 2 LAN 1
MAC 00AA00D1865D
10 Mbps 10 / 100 Mbps ADDRESS
LAN
Figure 13. Telnet to Local Management. A terminal on
the LAN must be on the same subnet as the router.
VT100 terminal
or PC with terminal
emulation software
3032
Setting
9600
8
None
1
None
Terminal
Configured with IP
address: 192.0.2.2
sub mask: 255.255.255.0
Console
CASE 123456 789
ASSY
TELNET
192.0.2.1
3033