A Typical Wash Programme - Hotpoint WMA10 Installation And User Instructions Manual

A typical wash programme

WARNINGS:
Do not allow
children to
play with the
machine or
tamper with
the controls.
Do not
overload the
machine! It
may damage
laundry and
reduce the
quality of
the wash.
Do not try to
open the door
when the door
indicator light
is on.
Do not open
the dispenser
drawer
during any
programme.
12
Sort your laundry into groups by washcare labels.
1
Load the machine, making sure that clothes are not trapped
in the door. Close the washing machine door by pushing it
until it clicks.
2
3
4
5
6
When the programme has finished the 'Prog End' and 'Door
7
Locked' indicator lights will remain lit. After a short time the
'Door Locked' indicator light will go out. You can then open
the machine door.
8
Add detergent and fabric
conditioner, if required, to the
dispenser drawer.
Refer to the detergent
manufacturer's dosage instructions.
Turn the programme selector dial to
the programme required.
The 'Prog End' light will illuminate,
indicating that the machine has
power.
Select any optional wash feature(s)
that you may require by pressing
the appropriate button(s), indicator
lights will show what you have
chosen.
When all selections have been made press
the 'START/Hold To Reset' button. The
'Prog End' light will go out and the
'Active' light will illuminate to indicate the
start of a programme. After a short time
the 'Door Locked' indicator light will
illuminate. To cancel a programme once
the machine has started, press and hold in
the 'START/Hold To Reset' button for two
seconds, until the 'Prog End' light flashes.
You can then re-select the programme you
want. Press the 'START/Hold To Reset'
button again to carry on.
During the wash programme the
'Active' and 'Door Locked' indicator
lights will remain lit.
To switch the machine off, return the
programme selector dial to its 'OFF'
position. The 'Prog End' light will go
out.
We also recommend that you switch
off the electricity and water supply.