A Typical Wash Programme - Hotpoint WM60 Instruction Manual

A Typical Wash Programme

WARNINGS
Do not allow children to
play with the appliance
or tamper with the
controls.
Do not overload
appliance! It may
damage laundry and
reduce the quality of
the wash.
Do not attempt to open
the door when the
indicator light is on.
Note: We recommend on
completion of your wash
programme that you switch
off both the electricity and
water supply to the
appliance.
10
IMPORTANT INFORMATION: Before selecting a programme, ensure the mains
Sort laundry by label
1
into groups with the
same wash
requirements and
load appliance.
Select required wash
4
programme by turning
the wash dial clockwise,
you will hear a click as
the pointer aligns at the
start position.
Switch on both the
7
water & electricity
supply at the mains.
2
Close door by applying
pressure at the
3 o'clock position.
Select optional wash
5
features by pressing
button, it will come out.
To cancel, press again
and button will be flush
to the console.
Switch 'ON' , after a few
8
seconds the Door Locked
indicator light will
illuminate and the door
will lock. This light will
remain lit throughout
the wash programme.
button is in the 'OFF' position.
Add detergent and or
3
conditioner to the
dispenser drawer, see
pages 14-15. Refer to
detergent manufacturer's
dosage instructions.
(Model WM79 only)
6
Select reduced spin
speed (if required) by
turning the variable spin
speed control dial.
1-2 minutes after
9
completion of the wash
programme the Door
Locked indicator light
will go out and the door
can be opened.
Switch 'OFF' after use.