Switching Temporarily To Touch Tone Dialling (Dtmf) - Gigaset SL780 User Manual

Connecting the base to the PABX
Changing the pause after the recall
key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v
Open the main menu.
*#Q5# 2
Press keys.
~
Enter a digit for the length of the
pause (1 = 800 ms; 2 = 1600 ms;
3 = 3200 ms) and press
Changing a dialling pause (pause
after access code)
Precondition: You have saved an access
¢
code ( page 69).
v
Open the main menu.
*#Q5#
Press keys.
~
Enter number for the length of
the pause
(1 = 1 sec.; 2 = 2 sec.; 3 = 3 sec.;
4 = 6 sec.)
and press
To insert a dialling pause: press and hold
S for 2 seconds. A P appears in the dis-
play.
70
§OK§
.
§OK§
.
Switching temporarily to
touch tone dialling (DTMF)
If your PABX still operates with dial pulsing
(DP), but you need touch tone dialling
(DTMF) for a connection (e.g. to listen to the
network mailbox) you must switch to touch
tone dialling for the call.
Precondition: You are conducting a call or
have already dialled an external number.
*
Press the star key.
After the call is ended, dial pulsing is auto-
matically activated again.