Gigaset SL780 User Manual page 15

If you need to reopen the battery cover to connect the USB data cable or change
the battery:
¤
Remove the belt clip (if
attached).
¤
Place your fingernail into the
notch at the bottom of the
casing and pull the battery
cover upwards.
To change the battery, place
your fingernail in the cavity in the
casing and pull the battery
upwards.
Attaching/removing the belt clip
The handset has notches on each side to attach the belt clip.
¤
To attach – press the belt clip
onto the back of the handset so
that the protrusions on the belt
clip engage with the notches.
¤
To remove – using your right
thumb apply pressure to the cen-
tre right of the belt clip, push the
fingernail of your left index finger
between the clip and the casing
and lift the clip upwards.
First steps
13