Download  Print this page

D-Link dCS-P Specifications

7" outdoor dome housing.
Hide thumbs
   

Advertisement

Outdoor Installation
These IP66 certified enclosures are
specifically intended to be mounted
outdoors. All DCS-71 models include a
heater and a blower that enable them to
work in a wide range of temperatures from
-20 to 70 °C.
Versatile Connectivity
The DCS-71P model features Power over
Ethernet (PoE), which eliminates the need
for power cables. The DCS-71W model
is equipped with wireless antennas that
allow for wireless transmission of
camera footage.
Features
ƒIP66 certified weatherproof, dustproof
enclosure
ƒHeater and blower
ƒWall-mounting bracket for installation
ƒBuilt-in wireless antennas
1
ƒSupports PoE 802.3at
2
ƒCameras supported:
ƒDCS-5605, A1 (DCS-71)
ƒDCS-5605, A2 (DCS-71P)
ƒDCS-5635, A2 (DCS-71W)
DCS-71W only
1
DCS-71P only
2
7" Outdoor Dome Housing
DCS-71, 71P
D-Link's DCS-71 Outdoor Dome Housing series provides cost-effective protection and versatile connectivity
options for installing D-Link motorized pan and tilt surveillance cameras in outdoor environments. The DCS-71P
model features Power over Ethernet (PoE) while the DCS-71W enables wireless connection to be used for the
security camera, providing extra convenience in connecting and wiring surveillance cameras. A built-in power
supply, heater and blower mean these housings can be used under adverse weather conditions.
Flexible Connectivity Options
The DCS-71P incorporates Power over Ethernet
(PoE) in which electric power is transmitted over
an Ethernet cable along with data. This allows the
DCS-71P model to be easily installed in a variety of
locations without the need for power cabling. The
DCS-71W is equipped with wireless antennas that
allow the camera to be controlled and monitored
wirelessly, avoiding the need to install Ethernet
wiring.
Weather-proof
Designed to be mounted outdoors, the DCS-71
housings feature an IP66 certified enclosure which
protects against the elements including dust and
heavy jets of water, allowing cameras to be placed in
harsh environments.
DCS-71 Series
DCS-71W
Onboard Heater and Blower
The DCS-71 housing series also has an onboard
heater and blower that enable the enclosed camera to
function in a wide range of temperatures. The heater
automatically turns on when the temperature drops
below a certain point, and the blower automatically
turns on when the temperature rises above a certain
point. This allows the camera to function properly in
both hot and cold environments.
01

Advertisement

   Related Manuals for D-Link dCS-P

   Summary of Contents for D-Link dCS-P

  • Page 1 D-Link’s DCS-71 Outdoor Dome Housing series provides cost-effective protection and versatile connectivity ƒSupports PoE 802.3at options for installing D-Link motorized pan and tilt surveillance cameras in outdoor environments. The DCS-71P model features Power over Ethernet (PoE) while the DCS-71W enables wireless connection to be used for the ƒCameras supported:...
  • Page 2 No. 289 Xinhu 3rd Road, Neihu, Taipei 114, Taiwan Specifications are subject to change without notice. D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries. All other trademarks belong to their respective owners. ©2011 D-Link Corporation. All rights reserved.

This manual also for:

Dcs-Dcs-wDcs-71Dcs-71pDcs-71w

Comments to this Manuals

Symbols: 0
Latest comments: