Auxiliary Input - Jensen JMS2012 Installation And Operation Manual

JMS2012
Equalizer
Press the EQ/LOUD button (11) to turn on the equalization function and select between five
pre-defined bass and treble curves: USER > FLAT > ROCK > CLAS (classic) > POP.
NOTE: "USER" setting is only available if the bass and treble settings are manually set
by the user.
Loudness
Press and hold the EQ/LOUD button (11) to toggle loudness on/off. When listening to music at
low volumes, this feature will boost the bass and treble ranges to compensate for the
characteristics of human hearing.

Auxiliary Input

To access an auxiliary device:
1. Connect the portable audio player to the AUX IN connectors on the back of the unit.
2. Press the MODE button (20) to select "Auxiliary" mode.
3. Press MODE again to cancel Auxiliary mode and go to the next mode.
Liquid Crystal Display (LCD)
The current frequency and activated functions are shown on the LCD panel (19).
NOTE: LCD panels may take longer to respond when subjected to cold temperatures for
an extended period of time. In addition, the visibility of the numbers on the LCD may
decrease slightly. The LCD display will return to normal when the temperature increases
to a normal range.
Scroll
When the information is too long to be displayed on the LCD, press the DISP/SCROLL button
(21) to view the entire title. The information will scroll twice and then return to abbreviated text.
5