Table of Contents
Advertisement
deleted.
3)
Press and hold the AUTO DEL button and
the respective CHASE button then release
to delete the chase. All LED's will blink 3
times.
DELETE AL L CHASE P ROGRAMS
CAUTION! This procedure will result in irrevocable loss of chase step memory. The individual
Action
1)
Press and hold the BANK DOWN button
and the AUTO DEL button while turning
OFF the controller.
P layback (Scenes)
1 4 B
MANUAL RUN S CENE
When power is first turned ON, the controller will be in manual scene mode.
Action
1)
Make sure neither MUSIC TRIGGER nor
AUTO TRIGGER LED's on the LED
display are on.
2)
Select the program BANK that stores the
scene you want to run manually by using
the BANK UP/DOWN.
3)
Press the SCENE button to run.
RUNNI NG IN SOUND-MODE
Action
1)
Press the MUSIC/BANK-COPY button
until the MUSIC TRIGGER LED turns on.
2)
Change BANK programs by using BANK
UP/DOWN buttons if necessary.
3)
Press the MUSIC/BANK-COPY to exit.
RUNNI NG IN AUTO -MO DE
Action
1)
Press and hold the AUTO DEL button until
the AUTO TRIGGER LED turns on.
2)
Change BANK programs by using BANK
UP/DOWN buttons if necessary.
3)
You can adjust the time between steps by
moving the SPEED fader and the fade
Obey™ 70 User Manual
scenes and program banks will be preserved.
16
Notes
Notes
If you are in programming mode you can also
press and hold the PROGRAM button until
Program is removed from the display.
Notes
In the Sound mode, programs will be triggered by
the sound using its built-in microphone. All scenes
in a Bank will chase.
Notes
In the Auto mode, programs will be triggered by
controllers fade and speed time as set on the
faders. All scenes in a Bank will chase.
CAUTION! The fade setting should never be
slower than the speed setting or the scene will
Revised: 2008-08-04 16:55:52
Hide quick links:
Advertisement
Table of Contents
