Usb Configuration; Onboard Devices Configuration - Asus J1800I-C User Manual

Ipv6 PXE Support [Enabled]
This item allows user to disable or enable the Ipv6 PXE Boot support. Configuration options:
[Disabled] [Enabled]
2.5.5

USB Configuration

The items in this menu allow you to change USB-related features.
The USB Devices item shows the auto-detected values. If no USB device is detected, the
item shows None.
XHCI Mode [Enabled]
Allows you to enable or disable the XHCI Mode. Configuration options: [Enabled] [Disabled]
EHCI Hand-off [Disabled]
[Enabled] Enables the support for operating systems without an EHCI hand-off
feature.
[Disabled] Disables the function.
USB Per Port Control
USB3_1 / USB2 / USB3 / USB_E1234 [Enabled]
Configuration options: [Enabled] [Disabled]
2.5.6

Onboard Devices Configuration

HD Audio Controller [Enabled]
[Enabled] Enables the High Definition Audio Controller.
[Disabled] Disables the controller.
The following item appears only when you set the HD Audio Controller item to [Enabled].
Front Panel Type [HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or high-
definition audio depending on the audio standard that the front panel audio module supports.
[HD] Sets the front panel audio connector (AAFP) mode to high definition audio.
[AC97] Sets the front panel audio connector (AAFP) mode to legacy AC'97
Realtek LAN Controller [Enabled]
[Enabled] Enables the Realtek LAN controller.
[Disabled] Disables the controller.
Serial Port 1/2 Configuration
The sub-items in this menu allow you to set the serial port configuration.
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM) 1/2. Configuration options:
[Enabled] [Disabled]
ASUS J1800I-C 2-15