Troubleshooting - DICE Interface for iPod Installation Manual & User Manual

Troubleshooting
Problem Solution
Cannotselectthe interface. Check DIP switch settings (refer to pp.11, 23). With the
ignition OFF disconnect vehicle harness from module for a
few seconds and reconnect. Verify that the correct button
is used to access the interface (CDC or SAT).
Noaudiofrom iPod source. Reset the iPod. Verify proper connection to interface.
Radio/ steering wheel controls do not operate iPod.
Reset iPod and make sure most recent iPod firmware is
installed. Check vehicle user manual on how steering
wheel controls work.
Radio/ steering wheel controls do not operate iPod, but Select DISC/Mode 5 and Track/Channell. Switch back to
audio is still present.
DISC/Mode 1 andtrychangingTracks.