Troubleshooting - DICE iPod AUX Interface Installation Manual

Troubleshooting

Cannot select the interface using the radio.
No audio from iPod source
iPod does not charge
Music is distorted or sound level is too low
No audio from auxiliary device (1/8" mini jack)
Problem
Check all connections. With the ignition OFF disconnect
vehicle harness from module for a few seconds and
reconnect. Turn ignition to ACC/ON. Verify that the correct
button is used to access the AUX input.
Reset the iPod. Verify proper connection to iPod/interface.
Check all connections. Reset iPod and make sure iPod
charges while connected to computer or wall charger.
The output gain for iPod and AUX should be adjusted
using the potentiometers. See pg. 10.
Refer to the documentation of the device for the correct
audio ouput settings. Verify proper connection to
device/interface.
Solution
15