Scrolling Feature - DICE Interface for iPod Installation Manual & User Manual

Scrolling feature - in SAT emulation, Mode 6
(Only
with AudiNW-SATkit)
To set and change scrolling feature press CAT/FLDR button repeatedly until Mode 6 is selected. Change options by
pressing Seekffrack or turning the Tune dial. After setting the desired feature turn off the ignition for at least SO
seconds to engage the new selection.
XM 1 001
SHORT SCROL
SOFTWARE VERSI
~ ::
CAT ::
FLDR::
XM 1001
SHORT STAT
SOFTWARE VERSI
XM 1 001
LONG STAT
SOFTWARE VERSI
XM 1 001
LONG SCROL
SOFTWARE VERSI
Certain amount of blinking is normal on some radios when the scrolling feature is on.
Firmware version information - in SAT emulation, Mode 6
Firmware versions are displayed while in Mode 6. This may be needed by a support technician if troubleshooting is
necessary. Having this information ready before requesting technical support may expedite the troubleshooting
process.
XM 1 001 XM 1 001 XM 1 001 XM 1 001
SHORT STAT
C==::>
SHORT STAT
C==::>
SHORT STAT
C==::>
SHORT STAT
(" CAR 100) ( IPOD 1.00) ( AUX 100 ' ) ( CORE 100' )
~==:::::=o--"------"'"