Video Recording - JVC GC-PX100 User Manual

Video Recording

You can record without worrying about the setting details by using the Intelligent Auto mode. Settings
such as exposure and focus will be adjusted automatically to suit the shooting conditions.
In case of specific shooting scenes such as person etc., its icon is displayed on the screen.
0
Before recording an important scene, it is recommended to conduct a trial recording.
Zooming
(Telephoto)
(Wide angle)
You can also tap 6 on the touch screen to record. To stop recording, tap 7.
0
By tapping the [MARK] button to switch to the mark mode, different types of marks can
0
be put onto the scenes while recording, to make it easier to find the marked scene later.
Indications during video recording
o
Video Quality
Image Stabilizer
Recording-Standby
Recording in Progress
MARK button
NOTE
The estimated recording time of the supplied battery pack is approximately 60
0
minutes.
Do not remove the battery pack, AC adapter, or SD card when the access lamp
0
is lighted. The recorded data may become unreadable.
This unit turns itself off automatically to conserve power when it is not operated
0
for 5 minutes.
The angle of view may change when the image stabilizer is turned on or off.
0
The power may turn off to protect the circuit if the temperature of this unit rises too much.
0
Turn on the
power.
REC
Check if the
recording mode is
A
video.
A
If the mode is B still
image, press A/B to
switch.
Recording Media
Battery Indicator
Scene Counter
Remaining Recording Time
0:00:00 [0:54]
MENU
Check if the
recording mode is
P Intelligent Auto.
If the mode is other
than P, set the
shooting dial to
i.AUTO.
Start recording.
Press again to stop.
9