Inserting An Sd Card - JVC GC-PX100 User Manual

Inserting an SD Card

Insert a commercially available SD card before recording.
NOTE
Operations are confirmed on the following SD cards.
Manufacturer
Video A
Still Image B
Using SD cards (including SDHC/SDXC cards) other than those specified
0
above may result in recording failure or data loss.
This unit is not guaranteed to operate with all SD cards, even when using the ones
0
specified above. Some SD cards may not work due to specification changes, etc.
To protect the data, do not touch the terminals of the SD card.
0
When using an SDXC card, check its compatibility with the OS of your computer
0
by referring to the Detailed User Guide.
Label
Open the battery
cover after
opening the LCD
monitor.
Insert an SD card.
Panasonic, TOSHIBA, SanDisk
Class 4 or higher compatible SD card (2 GB)/
Class 4 or higher compatible SDHC card (4 GB to 32 GB)/
Class 4 or higher compatible SDXC card (48 GB to 128 GB)
To select [MOV 1080p LPCM], [MP4 1080p] or [iFrame
0
720p] in [VIDEO QUALITY], use a Class 6 or higher
compliant SDHC/SDXC card.
To select [50p] in [SYSTEM SELECT], use a Class 6 or
0
higher compliant SDHC/SDXC card.
SD card (256 MB to 2 GB) / SDHC card (4 GB to 32 GB) /
SDXC card (48 GB to 128 GB)
Turn off the power of this unit
0
before inserting or removing
an SD card.
To remove the SD card
0
Push the SD card inward once,
then pull it out straight.
7