Jeep Wrangler 2014 Owner's Manual page 245

Hide thumbs Also See for Wrangler 2014:

Table of Contents

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 243

7. If the swing gate brackets were removed, install them

8. Move to the rear of the vehicle and gently pull the sail

by hooking the rear edge of the bracket on the interior

panels over the rear roof bow.

side of the body channel. Then, rotate it rearward and

over the channel until it snaps onto the exterior part of

the rail. To be properly located, the bracket must only

be clipped to the shortened rail edge.

Chapters

Table of Contents