After Starting; Engine Block Heater - If Equipped; Manual Transmission - If Equipped - Jeep Wrangler 2014 Owner's Manual

Hide thumbs Also See for Wrangler 2014:

Table of Contents

418 STARTING AND OPERATING

After Starting

The idle speed is controlled automatically and it will

decrease as the engine warms up.

ENGINE BLOCK HEATER — IF EQUIPPED

The engine block heater warms the engine, and permits

quicker starts in cold weather. Connect the cord to a

standard 110-115 Volt AC electrical outlet with a

grounded, three-wire extension cord.

The engine block heater must be plugged in at least one

hour to have an adequate warming effect on the engine.

The engine block heater cord is found under the hood

bundled in front of the battery tray.

Remember to disconnect the engine block heater

cord before driving. Damage to the 110-115 Volt AC

electrical cord could cause electrocution.

MANUAL TRANSMISSION — IF EQUIPPED

You or others could be injured if you leave the

vehicle unattended without having the parking

brake fully applied. The parking brake should al-

ways be applied when the driver is not in the vehicle,

especially on an incline.

Table of Contents